Custom Two-Part Holder for Pegboard
Pickup available at Atelier Aire - Paris 18 eme
Usually ready in 5+ days
A two-part pegboard holder, made to fit whatever you want to display or store: phone, tablet, e-reader, book, frame, decorative plate… Enter its width and thickness, choose the height of the holders and the colour: we print both wings to your measurements.
- Made to measure to the millimetre: inner width from 60 to 300 mm, inner depth from 8 to 80 mm, height from 70 to 200 mm.
- Rail mounting: like our pegboard shelf bracket, each wing slides onto a rail screwed to the board. It comes off without tools.
- Your item stays visible: it slides between the board and the rounded front of the wings, which hold it from below.
- 12 colours, in 3D-printed bio-based plastic (PLA).
How to choose the dimensions
- Inner width: width of the item + 2 mm.
- Inner depth: thickness of the item + 1 mm.
- Height: height of the wings; the taller they are, the higher the item is held.
The rails fit the 30 mm grid of the pegboard: the spacing of the wings is calculated so that each rail lines up with a row of holes.
Specifications
- Material: bio-based plastic (PLA), 3D printed.
- Contents: 2 wings (left and right), 2 rails and their screws.
- Compatible with Aire pegboards (holes spaced 30 mm apart).
Détails
- Matériaux de Qualité : Fabriqué avec soin pour assurer durabilité et esthétique.
- Polyvalence : Parfait pour une variété d'usages, des rappels professionnels aux souvenirs personnels.
- Fabrication Française : tous nos produits, sont fabriqués dans notre atelier, à Paris, en France.
Découvrez une nouvelle façon d'organiser et de personnaliser votre espace.
Expédition et retour
Vous pouvez renvoyer tous les produits standards dans un délai de 14 jours après la réception du produit. Les frais de retour sont à votre charge.
