Technical specifications of our Pegboards

Here you will find all the technical specifications of our pegboards. As far as we know, our accessories are only compatible with our pegboards!
Technical specifications sheet

Technical characteristics of Aire pegboards

  • Material: Birch plywood from Finland

  • Available finishes:
    o Natural, sanded, raw wood
    o Natural oiled wood with a matt, raw appearance (Blanchon Environnement A+)
    o Tinted oil colors (green, blue, yellow, black, white, specific RAL)

  • Thickness :
    o Wall pegboards: 9 or 15 mm
    o Freestanding pegboards: 21 mm

  • Standard dimensions:
    o Format S: 48 x 48 cm
    o Format M: 96 x 48 cm
    o Format L: 96 x 96 cm
    o XL format: 144 x 96 cm
    o Other formats on request

  • Weight depending on format and thickness:
    o CP 9 mm: 5.4 kg / m²
    o CP 15 mm: 10.5 kg / m²
    o CP 21 mm: 14.7 kg / m²
  • Perforations :
    o hole diameter: 6.1 mm
    o hole spacing: 30 mm center to center
    o The rods must fit at least 15 mm into the pegboard for the accessories to work properly

  • Wall mounting :
    o By screws and multi-material dowels (supplied)
    o Drilling the wall in 5.5 or 6mm
    o Compatible with BA13, concrete block, brick or concrete

  • Maximum theoretical permissible load :
    o 160 kg / m2 (Cinder block, brick, concrete)
    o 55 kg / m2 (BA13)

Use / maintenance / information

  • Using the pegboard
    1. Fix the panel to the wall using the supplied fixing kit and the installation manual
    2. Insert the stainless steel pins into the perforations at the desired locations.
    3. Place accessories on the pins as needed.
    4. Adapt the configuration as desired for optimal organization

  • Interview :
    o Clean with a dry or slightly damp cloth
    o Avoid prolonged exposure to humidity

  • Additional information :
    o Made in France, Paris, 75018
    o Pegboard wood from Finland, solid wood (accessories) from France
    o Warranty: 2 years against any manufacturing defect